PRODUCT HAS BEEN UPDATED TO NEW: X-SLIM C520 GEN2

The dark optics, VERY slim body and frameless lens structure of the Purelux Black X-Slim C520 lamp combined with a curved design make the lamp a very stylish choice for the front of even newer vehicles. The body height of only 40 mm and the low mounting feet allow for discreet installation, for example, on a license plate holder, behind the mask or on the roof. The completely flat front reduces the accumulation of snow and ice in front of the lens, because unlike most other panels, the Black X-Slim series does not have a threshold formed by the frame. The lens is made of UV-protected, practically unbreakable polycarbonate, whose hard-coated surface protects against scratches. The Black X-Slim C520 is best suited for passenger car use, whether it is a small or large passenger car. Due to its modern style, it is also ideal for new cars when installed with a holder.

The curved C520 version of the X-Slim series offers, according to the manufacturer, a light output of 3631 lumens and a range of 418 m (1 lux). In addition to the long range, the curved design spreads the light beam sideways, also enabling perfect illumination of benches. The 5700K color temperature of the lamp is pleasant to the eye even when driving in snowy terrain, and it reduces eye strain. The curved Purelux Black series is definitely one of the most interesting additional light series of the season!!

Due to the slim body, the reflectors have also been completely redesigned: unlike traditional lights, the LEDs are directed from the front of the lamp to the reflectors at the back, from which the curved reflector technology directs the light exactly where it is needed most. The solution reduces unnecessary stray light and therefore also the glare caused by the additional light, as the LED modules themselves are not directly visible. The reflectors create an optimal beam for vehicle use: the reflectors in the middle direct the light with a tight beam far forward, and the spreading reflectors on both edges create a flat and wide beam that illuminates from side to side of the road. The curved design of the body broadens the light beam even further, thus helping to illuminate benches, for example.

The extremely low and thin body in terms of depth enables the lamp to be installed inconspicuously. The compact design combined with the curved body and extremely stylish appearance ensure that the lamp fits into any car in terms of appearance. The light is supplied with both end and bottom rail brackets, so there are suitable brackets for any installation. The wide adjustment range of the brackets allows the lamp to be directed up to 15° up and down, so the lamp can also be installed in locations where the bumper design is different from the traditional one. The Purelux Black X-Slim series is water and dustproof according to the IP67 classification, so you don't have to worry about the durability of the lamp even in the toughest use.

Note! Larger X-Slim C800 and C1010 models also available.

NOTE! Also available in straight Purelux Black X-Slim models: X-Slim S180 , X-Slim S250 , X-Slim S520 , X-Slim S800 and X-Slim S1000

Basic delivery content

• Purelux Black X-Slim C520
• Width-adjustable rail mounting feet
• End legs
• Cable with Deutsch DT2 connector

Delivery content (1 piece - Complete set)

• Basic delivery content
• Purelux relay wiring kit for easy connection
• License plate holder (EU) for easy installation

Delivery content (1 pc - Complete set with flush mounting bracket)

• Basic delivery content
• Purelux relay wiring kit for easy connection
• End-mounted license plate holder for flush mounting
  • Enables a neat flush installation below the license plate, e.g. in the air intake under the plate. The bracket is installed behind the license plate. The panel is attached to the bracket at the attachment points of the end legs. Note! The bracket does not have pre-drilled holes for the EU plate mounting screws.

Specifications

• Brand and model: Purelux Black X-Slim C520
• Intended use: As an additional light in cars / work machines
• LED: 21 x 5W Osram CSHP
• Operating voltage: 10-30 V
• Reference number: 45
• Manufacturer's stated current consumption: 3.84A @ 12V / 2.03A @ 24V
  • Measured by Valostore: 1.95A @ 24V
• Rated power: 105 W
• Manufacturer's declared power: 48.72 W
  • Measured by the light bulb: 46.7 W
• Theoretical luminous efficacy: 3631 lm
  • Measured by the light source: 2838 lm
• Manufacturer's stated range: 835.4 m @ 0.25 lux / 417.7 m @ 1 lux
  • Light tower measured: 682 m @ 0.25 lux / 341 m @ 1 lux
• Manufacturer's stated color temperature: 5700 K
  • Measured by Valostore: 5584 K
• Mounting: End legs, width-adjustable bottom legs
• Connector: Deutsch DT2
• Cable length: approx. 50 cm
• Dimensions: 525.45 x 40 x 54.36 mm (Width/Height/Depth)
• Weight: 1300g
• IP rating: IP68
• Approvals: CE, RoHS, R112, R10
• Warranty: 24 months
• Importer: Handshake.fi

Installation guide

General connection and installation instructions here: Additional lights installation guide . The link contains the most common installations, including using a relay wiring harness, as well as a guide to installing additional lights on the CAN bus.