Additional light Purelux Black Boost C1070 - Curved / 107 cm / 400W / Ref. 50

=> UPDATED - NEW MODEL CAN BE FOUND HERE: C1070 GEN2 <=

The dark optics and frameless lens structure of the Purelux Black Boost C1070, combined with its curved design, make it a very stylish choice for the front of even newer vehicles. The completely flat front reduces the accumulation of snow and ice in front of the lens, as unlike most other panels, the Black Boost series does not have a threshold formed by a frame. The lens is made of UV-protected, practically unbreakable polycarbonate, whose hard-coated surface protects against scratches. The Black Boost C1070 is designed primarily for those who drive a lot and need a lot of light both far ahead and on the sides of the road.

Due to its size, the Black Boost C1070 is best mounted on the roof or on the front of heavy equipment. The beam is both wider and higher than its smaller siblings, so the light is at home in hilly terrain and roof installations. In addition, the curved design spreads the beam comfortably sideways. According to the manufacturer, the curved C1070 version of the Boost series offers 9222 lm of light output and a range of 449 m (@ 1lux). The 5700K color temperature of the lamp is comfortable even when driving in poor weather conditions, and it reduces eye strain. The curved Purelux Black series is definitely one of the most interesting additional light series of the season!!

Due to the slim body, the reflectors have also been completely redesigned: unlike traditional lights, the LEDs are directed from the front of the lamp to the reflectors at the back, from which the curved reflector technology directs the light exactly where it is needed most. The solution reduces unnecessary stray light and thus also the glare caused by the additional light, as the LED modules themselves are not directly visible. The reflectors create an optimal beam for vehicle use: the reflectors in the middle direct the light with a tight beam far forward, and the spreading reflectors on both edges create a flat and wide beam that illuminates from side to side of the road. The curved design of the body helps to widen the light beam even further for illuminating benches.

The low, deep body of the two-row luminaire allows for discreet installation. The compact design combined with the curved body and extremely stylish appearance ensure that the luminaire fits into any car. The light is supplied with both end and bottom rail brackets. This means that there are suitable brackets for any installation. The wide adjustment range of the brackets allows the luminaire to be directed up to 15° up and down, so the luminaire can also be installed in locations where the bumper design is different from the traditional one. Purelux's Black series is water and dustproof according to the IP67 classification, so you don't have to worry about the durability of the luminaire even in the harshest use.

Note! Smaller Black Boost C820 and Black Boost C560 models also available.

NOTE! Also available in straight Black Boost models: Boost S200 , Boost S360 , Boost S560 , Boost S820 and Boost S1070.

Basic delivery content

• Purelux Black Boost C1070
• Width-adjustable rail mounting feet
• End feet
• Cable with Deutsch DTP connector

Delivery content (1 pc + Wiring harness)

• Basic delivery content
• Relay wiring harness for easy connection

Specifications

• Brand and model: Purelux Black Boost C1070
• Intended use: As an additional light in cars / work machines
• LED: 80 x 5W Osram CSHP
• Operating voltage: 10-30 V
• Reference number: 50
• Manufacturer's stated current consumption: 13.2A @ 12V
  • Measured by Valostore: 6.98A @ 24 V
• Rated power: 400 W
• Manufacturer's declared power: 162.2 W
  • Measured by the light bulb: 167.6 W
• Theoretical luminous efficacy: 16261 lm
  • Measured by Valostore: 10565 lm
• Manufacturer's stated range: 899 m @ 0.25 lux / 449 m @ 1 lux
  • Light tower measured: 874 m @ 0.25 lux / 437 m @ 1 lux
• Manufacturer's stated color temperature: 5700 K
  • Measured by Valostore: 5617 K
• Mounting: End legs, width-adjustable bottom legs
• Connector: Deutsch DTP
• Cable length: approx. 50 cm
• Dimensions: 1068.7 x 70 x 78.63 mm (Width/Height/Depth)
• Weight: 4100g
• IP rating: IP68
• Approvals: CE, RoHS, R112, R10
• Warranty: 24 months
• Importer: Handshake.fi

Installation guide

General connection and installation instructions here: Additional lights installation guide . The link contains the most common installations, including using a relay wiring harness, as well as a guide to installing additional lights on the CAN bus.