Can bus switching relay XBB PowerUnit

Name: Can bus switching relay XBB PowerUnit
Brand: XBB
SKU: HS17728
Price: 77.93 EUR
Rating: 4.875 (8 reviews)

A PowerUnit relay to be installed in a normal relay wiring harness, which enables the connection of several lights to vehicles controlled by the CAN bus. Works together with the Dongle control unit.

4.9/5 (8 reviews)

Free delivery across Europe on orders over 229 €. Returns are always free.

77,93 €

-6%82,90 €

Product number: HS17728

Unknown availability

Product ratings

4.9

number of ratings 8

Read all reviews →

Read more
Tycker att priset är i överkant lite för mycket. Funkar jätte bra som produkt. Bara massa +++++++ Mvh Maarten
Maarten R 27.10.2026
0
0
Veldigt førnøjd! Fungere feilfritt!
Jan hans ingvar G 13.10.2026
0
0
Enkelt att koppla in i bilden kan typ inte bli enklare.
Lars olof M 3.10.2026
0
0
Hade blivit 5 om den hade haft ett skruvfäste i ovankant
Joakim R 24.4.2026
0
0
så sykt praktisk
Kenneth F 5.8.2024
0
0

Product Faq

24.1.2026 Nils N, Servus kann ein dongel 2 XBB Relais steuern?

Hello, Yes, absolutely. One single XBB OBD Dongle can control multiple XBB PowerUnits (Relays) simultaneously. You do not need to buy two separate dongles. How it works: The Dongle acts as a Bluetooth transmitter. You can pair multiple PowerUnits to it using the XBB Configurator App. Common Setup Examples: Front + Rear Setup: PowerUnit A (Front): Configured to trigger on "High Beam" signal for your driving lights. PowerUnit B (Rear): Configured to trigger on "Reverse Gear" signal for your reverse lights. Result: Both are controlled by the single Dongle plugged into your OBD port. High Power Setup (Roof + Grille): If you have too many lights for a single relay (over 180W or 15A), you can install two PowerUnits to split the load. Both will turn on simultaneously with the High Beam. What you need to buy: 1x Complete Kit: XBB OBD Dongle & PowerUnit (Includes 1 Dongle + 1 Relay) 1x Extra Relay: XBB PowerUnit (Relay only)

A PowerUnit relay to be installed in a normal relay wiring harness, which enables the connection of several lights to vehicles controlled by the CAN bus. Works together with the Dongle control unit.

Note! On this product page, you can buy only the additional PowerUnit relay, which does not work without the Dongle control unit. You can find the package containing the control unit and the relay here: Connection relay for additional lights XBB OBD Dongle & PowerUnit.

The XBB PowerUnit is a relay that can be installed in the relay wiring harness, which enables several lights to be connected to a CAN bus-controlled vehicle. The PowerUnit is intended for use with the XBB Dongle control unit, for example in the installation of additional lights when the excitation current cannot be taken directly from the bulb's power cord, but the main beam signal must be taken from the OBD-II port. The dongle is installed in the OBD-II port, from which it captures the signal of the high beams, and sends the information to the PowerUnit installed in the relay wiring harness, which in turn controls the light installed in the car according to that signal. Up to four PowerUnit relays can be connected to one Dongle control unit, and one PowerUnit has two outputs, so by using several relays it is easy to connect to the same vehicle, for example, an additional light, an additional light's parking light and, for example, a separate reversing light. The PowerUnit can be installed in place of the original relay of the normal relay harness.

Note! The XBB PowerUnit only works together with the Dongle control unit, so if you don't already have a control unit, you can find a set covering both parts here: Connection relay for additional lights XBB OBD Dongle & PowerUnit .

Technical information

Nominal voltage: 12 / 24V
Operating voltage: 9-36V
Current consumption in sleep mode: 4 – 5.3 mA
Maximum load: 180W @ 12V
Connection: 5 x 6.3 mm
Operating temperature: -40 to 85°C
Weight: 27 g
Dimensions: 30 x 50 x 30 mm (W/H/D)
IP rating: IP53
EMC/Approvals:
- EN 50498:2010
- EN 50581:2012
- RED 2014/53/EU
- EN 300328 – V2.1.1
- EN 301489-01 – V2.1.1
- EN301489-17 – V3.1.1
- EN 60950 – 1:2006
- /11:2009
- /A1:2010
- /A12:2011
- /A2:2013
- EN 62479:2011-09
- RoHS 2011/65/EU
Warranty: 12 months

Easy and Safe Shopping

You can pay for the order safely and easily with Credit Card, Klarna, Paypal, Google Pay or Apple Pay. Shipping costs starts at only 3.90€. We use UPS and GLS for shipping.

Fast Delivery in 3-7 days (DHL/UPS/GLS)

Products in stock are normally shipped out within 1-2 working days. We process orders continuously and orders placed before 13 are normally sent at the same day. The shipment takes usually 3-7 days in Europe.

100% Satisfaction Guarantee

We want you to be 100% satisfied with your purchase. That's why we offer 30 days FREE returns if you are not happy with your product. Safe and carefree shopping at its best!