Canbus OBD reader XBB Dongle
A control unit that connects to the OBD-II port and enables reading of the high beam signal from the CAN bus in vehicles where the excitation current cannot be stolen from the bulb power wire. Used in conjunction with the XBB PowerUnit relay.
Product ratings
3.9
number of ratings 7- Lagde en feil i bilen min, slik at den måtte på verksted for nullstilling av feilkoderFrode F 10.6.2026
0
0
Valostore: Hei! Det høres ikke helt riktig ut, beklager den ... - Funkade inte med tundra 2019Mattias Ö 13.11.2025
1
0
- Liten smidig samt fantastisk telefon support vid frågor å funderingar.. tack igen!Daniel B 14.10.2025
0
0
Product Faq
A control unit that connects to the OBD-II port and enables reading of the high beam signal from the CAN bus in vehicles where the excitation current cannot be stolen from the bulb power wire. Used in conjunction with the XBB PowerUnit relay.
The XBB Dongle is a control unit that, together with the XBB PowerUnit relay, enables the installation of additional lights in can-bus controlled vehicles. The Dongle and PowerUnit are used when the excitation current cannot be taken directly from the bulb's power cable, but the high beam signal must be captured from the OBD-II port. The Dongle is installed in the OBD-II port, from which it captures the high beam signal, and sends the information to the PowerUnit installed in the relay wiring harness, which in turn controls the light installed in the car according to the said signal. A total of four PowerUnit relays can be connected to one Dongle control unit.
Note! On this product page you can buy just the Dongle control unit, which does not work without the PowerUnit relay. You can find the package containing the control unit and the relay here: Connection relay for auxiliary lights XBB Dongle & PowerUnit.
Specifications 
- Product: XBB Dongle
- Purpose: To capture excitation current from the OBD-II port
- Nominal voltage: 12/24V
- Operating voltage: 9-36V
- Power consumption in sleep mode: 3 – 5.4 mA
- Current consumption during CAN communication: 30 mA
- Connection: 2 x 8 pin male
- Operating temperature: -40 - 85°C
- Weight: 28g
- EMC/Approvals:
- EN 50498:2010
- EN 50581:2012
- RED 2014/53/EU
- EN 300328 – V2.1.1
- EN 301489-01 – V2.1.1
- EN301489-17 – V3.1.1
- EN 60950 – 1:2006
- /11:2009
- /A1:2010
- /A12:2011
- /A2:2013
- EN 62479:2011-09
- RoHS 2011/65/EU
- Warranty: 12 months
