Wiring harness with relay PURELUX Pro Series 12V, DT-3
Relay cable set for connecting additional lights with DT-3 connector. Contains everything you need for installation! Suitable for 12V voltage. 1 output, maximum load 180W.
Product ratings
3.8
number of ratings 13- Gut verarbeitet es fehlt aber die Halterun zum anbauen. Relai xxb hat kein HalterRene D 17.9.2025
0
0
Valostore: Hi there! Thanks for your feedback! The relay ca... - 100% Service, thanks a lotOlaf H 26.8.2025
0
0
- Sladdhärvan passade inte till poweruniten och skapade frustration när dongeln inte hittade poweunite...Anders theodor A 28.4.2026
0
0
Valostore: Hej Anders, och tack för ditt omdöme! Jag kan se... - Hyvä onA R 13.10.2025
0
0
- Hyvä johtosarja👍A L 29.9.2025
0
0
- Fungerar enligt förväntan, tidigare kontakter har glappat men inte denna.Simon E 28.2.2024
0
0
- asennttu onnistuneestiJ H 23.2.2024
0
0
- Mitäs mä rikkinäisiä johtosarjaa arvostelemaan, täysinnsusipaska liitin, lumisen setti toimi täysin ...Mikko jalmari V 24.10.2023
0
0
Valostore: Hei! Pahoittelut viallisesta tuotteesta! Pystyisi...
Product Faq
Relay cable set for connecting additional lights with DT-3 connector. Contains everything you need for installation! Suitable for 12V voltage. 1 output, maximum load 180W.
ATTENTION! The relay cable set also fits brands other than extra lights from Purelux. In our assortment you will find a large selection of relay cable sets equipped with useful connectors, of course the connector can be cut off from the relay cable set and connected directly to the wires of the auxiliary light.
The Purelux ProSerie relay cable kit is a simple and convenient solution for installing additional lights. This relay wiring kit contains everything you need to connect an auxiliary light with a DT-3 connector! Unlike other relay cable kits on the market, you don't have to buy all kinds of connectors depending on the connection method, with this relay kit everything you need is included in a complete package. The relay cable set is intended for the installation of an additional light, as the relay set has a DT output. In addition to the DT-3 connector itself, the cable harness is equipped with a separate (white) wire, which can be used to connect additional lights equipped with parking lights, heat or boost mode. The relay cable kit is suitable for 12V power.
Technical specification
- Make and model: Relay cable set Purelux Pro Series 12V, DT-3
- Area of use: Connection of additional light with DT-3 connector
- Operating voltage: 12V
- Contact: DT-3
- Max power: 180W
- Relay: 40A
- Fuse: 15A
- 1 contact
- Cable length from relay to auxiliary light: 225 cm
- Warranty: 12 months
| 1 exit | |
| Max. effect | 180W |
| Cable thickness (from battery to relay) | 16AWG / 1.18 mm2 |
| Cable thickness (from relay to auxiliary light) | 16AWG / 1.18 mm2 |
| Fuse | 15A |
| Relay | 40A 12V |
