Relay wiring kit PURELUX HD, 12V
Purelux relay wiring kit for installing very powerful additional lights! Maximum load 500W, suitable for 12V voltage.
Product ratings
4.8
number of ratings 44- Ein qualitativer Kabelsatz mit allem, was dazu gehört.Dennis L 18.10.2026
0
0
- Ihan ok. Johto on aika jäykkää tavaraa ja johtoa ei tarvitsisi ihan, niin pitkästi olla.Johan R 24.9.2026
0
0
Valostore: Hei! Kiitos palautteestasi! Pahoittelut ettei jo... - Ainakin toistaiseksi kestänyt 400w vanhan kattopanelin.Jari petteri A 14.9.2026
0
0
- Hyvä johtosarjaJanne L 28.1.2026
0
0
- Hyvä perusjohtosarja Lisävalojen helppoon kytkentään.J S 2.1.2026
0
0
- Superbra!Johan A 2.1.2026
0
0
- Ok sarja, mut virtajohto vois olla hiukan pidempi ennen sulakerasiaa helpottais esim. V70 mk2 sulakerasian sijoittelua.Mika petteri H 20.11.2025
0
0
- Känns gediget. Fungerar perfekt.Johan B 21.7.2025
0
1
- fornøyd med handelenØ G 25.5.2025
0
0
- Skit braE C 13.3.2025
0
0
Product Faq
Purelux relay wiring kit for installing very powerful additional lights! Maximum load 500W, suitable for 12V voltage.
NOTE! The Purelux relay wiring kit is also suitable for connecting additional lights other than Purelux.
The Purelux HD relay wiring harness is the solution for easy and hassle-free installation of additional lighting! This wiring harness can withstand a massive 500W load, meaning it is designed to withstand even the most powerful additional lights that many other wiring harnesses on the market simply cannot handle. The relay wiring harness has one output, so it can be used to install one additional light. Sturdy Abico connectors are included, making it easy to connect the light. The wiring harness has a 50A fuse and a 60A relay, and is suitable for direct 12V power. The excitation cable is 170 cm long, the power and ground cable is 54 cm long and the power cable for the light is 225 cm.
Specifications 
- Product: Purelux HD relay wiring kit
- Purpose: Connecting additional vehicle lights
- Voltage: 12V
- Connector: Sturdy Abico connector
- Maximum load: 500 W
- Relay: 60A
- Fuse: 50A
- 1 output
- Warranty: 12 months
| 1 output | |
| Max. current endurance | 500W |
| Wire thickness (from battery to relay) | 10AWG / 4.75mm2 |
| Wire thickness (from relay to light) | 10AWG / 4.75mm2 |
| Fuse | 50A |
| Relay | 60A 12V |
Circuit diagram
=> Installation and connection instructions for additional lights
=> More information about regulations regarding additional lights



