Spotlight 230V, AGGE Floodlight 50W, with motion sensor

AGGE Floodlight 50W is a floodlight with motion sensor, which is suitable for both indoor and outdoor spaces. The lamp is perfectly suited to illuminate a carport, a warehouse or, for example, a backyard. Thanks to the motion sensor, the light always turns on when motion is detected. The sensor detects movement at a distance of 10 meters, so it does not have to be placed right next to a door or walkway, but can be placed exactly where it fits best. The sensitivity of the motion detector can be adjusted to suit your own preferences, and the intensity of the light can also be adjusted. In this way, AGGE Floodlight can be configured to suit each user's needs.

The lamp's luminous flux of 4,000 lumens and a very wide (120°) and even light beam illuminate a larger area at once. The detection radius of the motion sensor is 140 degrees and the sensor can also be pointed in the desired direction. The lamp can be placed, for example, on the wall of a warehouse, house or other building, and monitor the entire room/area. The lamp is equipped with a handy handle, which makes it easy to transport. The handle can also be used as a support to lean the lamp against, alternatively implement a fixed installation using it. The light's neutral color temperature of 4000 kelvin is optimal for general lighting, and does not strain the eyes even during longer working periods. Using the AGGE Floodlight is as easy as it gets: Just connect the power cord to the power outlet and the light is ready to use!

The fixture and frame of the AGGE Floodlight are made of wear- and corrosion-resistant aluminum alloy. The fasteners are made of stainless steel and the lens is made of durable, tempered glass. The lamp is also completely protected against dust and water according to enclosure class IP44, so it can withstand all challenges and stresses from its surroundings. Thanks to its durable and high-quality construction, the lamp is also suitable for outdoor use. The LED lights turn on immediately and shine efficiently. The AGGE Floodlight is light and handy in size, so it is easy to move around and can also be easily taken with you when travelling. The ignition time after the end of the movement can be adjusted from 5 seconds to 2 minutes. Two year (24 month) warranty!

Note! Options with lower and higher power are also available:

• AGGE Spotlight 20W, with motion sensor
• AGGE Spotlight 100W, with motion sensor

Technical specification

• Make and model: Spotlight 230V, AGGE Floodlight 50W, with motion sensor
• Area of ​​use: As a work lamp / General lighting
• Operating voltage: 220 - 240V
• Type of light source: Fixed LED
• Power: 50 W
• Luminous flux: 4000 lm
• Color temperature 4000K
• Illumination angle: 120°
• Motion sensor detection angle: 140°
• Motion detection distance: 10 m
• Colour: Black
• Materials: Aluminum frame, tempered glass lens
• Dimensions: 217 x 50 x 220 mm
• Cable length: 800 mm
• Protection class: IP44
• Operating temperature: -40°C to +45°C
• Other: Motion sensor
• Energy class: F
• Warranty: 24 months

Quick guide

The lamp is equipped with a motion detector, which turns on the lamp when it detects movement. The motion detector settings can be changed from the three rotary switches on the back of the detector as follows:

Sens: By adjusting this switch, you can set the sensitivity of the motion detector to detect motion. You can increase the sensitivity by turning the switch clockwise.

Time: This switch can be used to adjust how long the lamp stays on after it has been turned on. The ignition time is increased by turning the switch clockwise.

Lux: This setting can be used to adjust how bright the lamp shines in a bright environment. By turning the switch clockwise, the light works even in a bright environment, and by turning it counter-clockwise, it works only in darkness.